Forum Replies Created

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • #120415
    Profile photo of SALC
    SALC
    Participant

    You cannot save a single scene (seens strange), only as a show.

    #115783
    Profile photo of SALC
    SALC
    Participant

    Hi thanks, but thats what I’m asking. Asking can you save just scenes on the USB A thumb drive.
    It seems you can only store shows on it.

    Have you saved just scenes on the USB A thumb drive, without saving it as a show?

    #115750
    Profile photo of SALC
    SALC
    Participant

    You cannot choose multi-track for the USB A drive.

    #115741
    Profile photo of SALC
    SALC
    Participant

    How do you save just a scene to the USB A Drive? I don’t see that as an option. Culd you go into greater detail?

    #115712
    Profile photo of SALC
    SALC
    Participant

    Not sure if you can save JUST scenes, or do they have to be inside a SHOW ?

    #115678
    Profile photo of SALC
    SALC
    Participant

    You can use the scene feature. Create a scene you need, save it, then add mutes to all the desired channel, and save it as the next scene.

    Then just toggle between the 2 scenes.

    Hope this works for you.

    #115611
    Profile photo of SALC
    SALC
    Participant

    I just got my CQ as well I would not record on the SD card it’s too small. You need a thumb drive USB a there’s a limit on the size of the SD card of 32 GB which is only about 10 minutes worth of recording at multi track, the S, the car does not have a size limit. It’s very hard getting an answer from these guys. It’s the manual really is not written well.

    #115549
    Profile photo of SALC
    SALC
    Participant

    I have a SQ5 and the Waves card I have does 64 channels in & out.

    #115502
    Profile photo of SALC
    SALC
    Participant

    I wish A&H would do more comprehensive video, (like Waves etc.), on the operations of their products. The video A&H does, only really mentions features, and does not go into great detail.

    1.I did not see one, detailed video on recording to and from a DAW.
    2.The functions of and accessing inputs 17-24 (CQ18t)
    ETC

    Tks
    Sal

    #115475
    Profile photo of SALC
    SALC
    Participant

    Just got the 18T. My gain assist is not working at all. on every channel. Sometime it will go you 1db and stop.

    When I set the gain manually the channel works fine.

    Also channels 2 & 14, using the same mic and gain settings, outputs to Logic Pro much louder that all other channels.

Viewing 10 posts - 1 through 10 (of 10 total)