Forum Replies Created
-
AuthorPosts
-
2017/01/19 at 4:56 pm #60719
Trying again with a resized to 75% picture.
Attachments:
You must be logged in to view attached files.2017/01/18 at 4:15 pm #60683Thanks Andreas. Can you explain how you did that. I’m obviously missing something fairly simple.
Thanks for doing that.
Joel
2017/01/18 at 3:03 am #60661Well, for some strange reason, I have to right click on the box and select “open image in new tab” to get it to show. hmmmm ……
2017/01/18 at 2:46 am #606602017/01/18 at 2:44 am #60659I don’t know if these are showing yet. I see a box with the descriptor in it. When I click on it, it does open the correct picture. Not figuring out how to actually have the picture show in my posts.
Anyway, if you can view them, the first and third pictures show the knobs from different angles. The black is standard QU fader knob. The white is a knob I robbed from an old A&H GL2 mixer. The red knob is one that I just purchased.
The second picture is a shot of the under side. The slot that fits over the “T” of the fader is ever so slightly smaller on the red knob than the other two. It fits, but takes a bit to get it on and off. After I installed and removed this red knob a few times, it seemed to loosen up a bit.
These are going to work fine for me. It’s not like I’m changing knobs during a show, so if it takes a few seconds longer, that’s OK.
Hope this helps others in their quest for various colors of fader knobs for the QU mixers.
2017/01/18 at 2:35 am #606582017/01/18 at 2:33 am #606572017/01/18 at 2:30 am #60656Is this working for anyone else?
Obviously I don’t post enough in internet forums!! lol
Attachments:
You must be logged in to view attached files.2017/01/17 at 2:53 pm #60640OK, well I’ll keep trying.
Thanks Mark.
Let’s try this.
…… Nope
Is this showing up for anyone?
2017/01/17 at 6:43 am #606342017/01/16 at 3:49 am #60594I’m trying to upload pictures, but not having any luck. If I can figure this out, I’ll get some pix up.
2017/01/16 at 3:40 am #60593Well, I finally had some time to try out the new fader knobs. They do fit. A bit more snug than the original knobs that come with the QU32 and the knobs I robbed from my old GL2 mixer. They are also just slightly wider than the other two, but work just fine.
This is where I bought mine on eBay – https://www.ebay.com/itm/6-professional-FADER-KNOB-cap-GREY-0-5-x-0-1-slider-potentiometer-replacement-/351703143027?hash=item51e3241273:g:sfkAAOSwgApXB-Zz
The seller’s ID on eBay is “familygate”. It took a couple of weeks to get, but they came from Germany and I’m in the midwest USA. Not surprising. I bought three different colors. Not as many colors as I’ve seen on Full Compass’ site, but WAY less expensive! Full Compass wants $3 – 4 each. I bought 20 knobs for about $35 including shipping from Germany.
2017/01/12 at 2:53 pm #60517Thanks all for your input.
I bought a refurbished ipad 2 with 64 GB for less than $200 and am about to get an Apple Airport Express. We’ll see how this works.
Thanks again.
Joel
2017/01/09 at 3:21 am #60410Thank you all.
I mainly want something to allow me to walk the room and set monitors from stage. I’m wondering now if I shouldn’t start with my iphone 6s. It’s a pretty sizable screen. See how well that works and go from there.
I’m thinking about getting an Apple Airport Express to use as a router. Any thoughts?
Again, thank you.
2017/01/08 at 4:36 am #60387 -
AuthorPosts