[JohnParticipant]

Mike C

Thanks for the suggestions. Cabling is good – while the mixer was out for repairs, I had a Mackie DL1608 installed that was working fine. The audio path goes from the mixer aux outputs through fixed cabling to the video position 150′ away. At the video console the signal goes through a distribution/impedance matching amplifier to two DVR’s I have switched to a different aux pair for this week and am running sound for the recording so I will see what happens.

[JohnParticipant]

I am going to open a ticket with the vendor (again) It lost one output to the video last fall so I patched it to another aux pair. The mixer failed completely the Thursday before Easter so I sent it for repair.

Other outputs – not sure since in today’s COVID times we are recording for video streaming
Other inputs – No, dropout id independent of mike in use.
Same time – No, random throughout the hour long record cycle.
Mikes are on mono channels generally mixed to the center. Stereo record was established for flexibility for other possible uses.

[JohnParticipant]

Alex:

If I save the scene and reset the settings, can I then reload the scene and get the mixer back to the prior state after I run a few tests on the output? I am testing with the internal signal generator feature (which I love). The mixer is used in a church audio setting and it has taken us quite a while to get it dialed in.

Thanks

John

[JohnParticipant]

No can do – there are other apps that require it to go to lock the screen and go to sleep. (for reference, The QSC Touchmix app does this)

[Author]

Posts