[ianmoonParticipant]

+1 Even if the engine is limited I’d sacrifice the number of groups/auxes for more auxes. Or even stereo matrixes for 2 mono matrixes per.

My current workaround is to use a mono aux set to post fader and send all my groups/inputs at 0Db to the aux then link outputs to a DCA for overall mute and level control if needs be and mix as (relatively) normal. Yes this is awkward and can mess with your head if you aren’t on top of things but it does work.

Hopefully mono matrixes with better mixer/bus config comes soon.

[ianmoonParticipant]

+1 and options such as adding more matrixes, even if it means cutting down on other output channels such as groups and auxes just like I/D-live “mixer config” menu.

[ianmoonParticipant]

+1

[ianmoonParticipant]

+1

[ianmoonParticipant]

I Believe you can route your mains into a mono group or aux which should provide a mono sum, just set it to 0db and leave it clean.

[ianmoonParticipant]

I did have a hunch that it would be a FAT 32 related issue. Just seems lame. bit of an afterthought in the design I think.

Better off just recording into a computer. Not even worth the hassle.

[ianmoonParticipant]

+1 For ganging

[Author]

Posts