[EricParticipant]

Thank you Mark & Keith for your help. That solved the problem. I could see on the SQ-6 the available function
for EQ and Compressor but the statement at the top “Mix Ext In Unassigned” resulted in me assuming (incorrectly)
that there was no more configuration available. I should have spent some time tapping on the SQ-6 screen to see
if anything happened! Younger people will tap all over a screen, when they are trying to figure out how to configure
a function. I simply need to do that more! I also noticed if I had been using the iPad app I would have
seen immediately the delay value for adjustment! Oh well. Looks like our new live stream setup is going to require
around .20ms to sync the lip movement.

Thank you again.
Eric

Attachments:

You must be logged in to view attached files.

[EricParticipant]

I have updated to the latest software for our ATEM Television Studio HD and there is no provision for delay on our model. As I mentioned I am told the older models do not have an architecture that allow delay.
I am enclosing a “monitor outputs.jpg” that shows some of our monitor outputs. I simply want to add delay to the FaceBL output. As you can see in the “Facebook.jpg” there is no delay value available for the monitor output. I am only showing the Compressor but nothing is available on the EQ tabs either. I could add an insert and use an FX but I don’t believe there is any effect available that will simply allow me to delay the entire signal. I might be wrong about that though. The only delay that I can add is on the “PAFL.jpg” which I assume is added to all the monitor outputs.
I assume at this point I am going to have to learn how to use a matrix as that seems to be the only way to add delay to a monitor output.
No we do not use an ME system

Attachments:

You must be logged in to view attached files.

[EricParticipant]

I will try again to upload files. I cannot get the second file in a small enough size.

Attachments:

You must be logged in to view attached files.

[EricParticipant]

I have included 2 attachments from our ATEM and there is no option that I know of for delay. The newer ATEM mini Pro’s I am told have an option to input delay, but the older models don’t. I am told the newer models have a different chip architecture that allows for delayed audio. At least that is my current understanding of the issue.
I am told mix minus involves the use of two cameras where I choose to use the audio from only one camera. I ignore the audio from the second camera. I then use video clips from both cameras and include the audio from only the specified camera.

[EricParticipant]

Yes the audio delay was a small value but it was both correct and noticeable while viewing the live stream. I have a media clip (with both visual and audio cues) that I play on a laptop for example. Then I actually film the media clip that is playing on the laptop using our entire signal chain in a live stream. All I then have to do is watch the live stream and I can see the exact amount of audio delay. The visual and audio cues will be out of sync and it is visually indicated exactly how many ms the adjustment needs to be. Works great.
Tomorrow night we have music practice and I will take a picture of the monitor mix structure so it will be easy to see. Just like you would have 5 in-ear mixes for the musicians, I have 5 in-ear mixes with a sixth in-ear mix that is routed to the YouTube/Facebook. There is a configuration value that is allowed for delay but I believe it will be applied to all six of the in-ear mixes. Not just the one for YouTube/Facebook.

[Author]

Posts