[cdennewitzParticipant]

Okay here is another question…With this setup is there any way to add a sepertate surface for monitors? I would be okay at this point if it was sharing the same controls and sharing resources as the FOH console. FOH would set preamps and channel controls and monitors would just be doning actual aux send mixing. I guess if I really needed to I could set up some of those inputs to come in on seperate processing channels as well. With two IDR’s I would have 128 channels of IP processing so I could do sepertate control over everything except the preamp. I will only be using around 40ish inputs. Does it sound as I am on the right track? At this point the A ACE port on the second IDR would be open, so I could plug the second surface in there?

Chad

[cdennewitzParticipant]

I am sorry some of this has me slightly confused, but I have bought a T112, and have one IDR-32, and looking to now add another one. From what i read above it is that to do this I would need to give up my card slots on both IDR’s to make them ACE, to link them, but with new firmware it could be done with out needing to buy cards for those slots?

Chad

[cdennewitzParticipant]

Yes it can be done, but from what I understand you need the ACE router and a second surface

Chad

[Author]

Posts