[BluzcatParticipant]

Thanks for the prompt responses, I’ll check the return signal from the computer. Cheers,

[BluzcatParticipant]

@markpaman, thanks for the correction. Yes, the dSnake port is what I meant. It’s the same size RJ45 jack as the network port.

[BluzcatParticipant]

I feel embarrassed to admit this, but when I was hooking my Qu32 up to the WiFi router, I wasn’t really paying attention to where I plugged the network cable in. I was just feeling with my fingers around the back, and found the jack. Spent about an hour trouble shooting everything, and could not get the Qu32 to get an IP address for the life of me. Finally I took a look at the back side, and realized I had plugged the cable into the jack used to link two or more Qu32 together. Face palm! When I plugged it into the correct jack, things worked fine.

[BluzcatParticipant]

Hi Andreas, and thanks for the quick response. I had previously set “Global USB Source” to “USB B Streaming”, and I tried it on channels 17/18 as well without success. However, I just got it to work by choosing “Select All” and changing them to “USB B Streaming”. I’m not sure exactly which channel is used by Logic to send Stereo Out back on, but it works now 🙂
Thanks!

[Author]

Posts