SQ6 & 2x DX168 output patching …. whats going on…??

Forums › Forums › SQ Forums › SQ troubleshooting › SQ6 & 2x DX168 output patching …. whats going on…??

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • 2018/02/27 at 2:33 pm #69232
    Profile photo of PhillPhill
    Participant

    ok so im setting up show file atm…
    I have SQ6 & 2x DX168 in cascade,

    I can easily set L&R to the first dx168 on output 1&2 and aux 1-6 on output 3-8 all good, however…

    when on the routing page I dont get the option for 9-16 on the slink tab, instead I have to select 17-24 for the additional outs..

    is this just me or not…

    Attachments:
    You must be logged in to view attached files.
    2018/02/27 at 3:26 pm #69234
    Profile photo of SteffenRSteffenR
    Participant

    It‘s written in the manual that it is like you discribe it
    So no surprise to some

    2018/02/27 at 3:32 pm #69235
    Profile photo of SteffenRSteffenR
    Participant

    Have a Look @
    https://www.allen-heath.com/media/SQ6_SLinkConnections_V1_1_0.pdf

    2018/02/27 at 3:42 pm #69238
    Profile photo of SteffenRSteffenR
    Participant

    And one more… probably the better document
    https://www.allen-heath.com/media/DX-System-Guide-ISS_1.pdf

    2018/02/27 at 5:12 pm #69242
    Profile photo of PhillPhill
    Participant

    DOH!! … RT*M THEN 😀 THX

    2018/02/27 at 9:26 pm #69254
    Profile photo of SteffenRSteffenR
    Participant

    don’t get me wrong, the handling could be better…
    but that’s for later… 😉

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.