SQ-5 + two DX168

Forums Forums SQ Forums SQ general discussions SQ-5 + two DX168


This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Mfk0815 Mfk0815 3 years, 5 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #86001
    Profile photo of Maxartis

    Hi everyone,

    I bought a second one DX168 to my SQ-5. Both devices in the I/O tab they occupy input channels from 1 to 32 and outputs from 1 to 8 and from 17 to 32. There is an empty gap in the assignment of channels between the output channels. I wonder if this is a normal situation? Maybe someone can compare this with their own system?

    I will be grateful for the information. Thanks!

    You must be logged in to view attached files.
    Profile photo of Mfk0815

    Thats ok. As far as I understand it each DX Device can potentially handle 16 outputs (this is a part of the DX Protocoll) even if there are less outputs. So for the DX168X you will have to live with that gap. The GX4816 for instance will use the first 16 outputs.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.