When ‘Processing Screen follows surface’ (I think that’s the correct wording!) is selected in surface prefs, can the screen be sent to the PEQ by pressing any of the EQ-band buttons – LF, LM, HM, HF. Currently the EQ in/out button triggers the screen change, or moving any of the EQ encoders but I think being able to press one of the band buttons would be a ‘non-invasive’ way of getting there without changing anything?
2nd:
When moving the HPF Encoder PLEASE open or STAY at the PEQ page. there is the HPF visible…
when adjusting the EQ, for me – HPF is a part of this process – an because of this the HPF is also visible in the PEQ page.
so at least for me there is NO NEED to switch the screen to the HPF view! – it’s useless and disturbing
Sounds like this universally appreciated (including me) firm ware upgrade would be a good idea. This suggestion is a very positive improvement for most all of us so perhaps Keith will let us know when or if it will be considered.
Hugh
Another +1 for me. I absoultely agree with the opportunity to change to the screen wihout changing something on the EQ by just pressing one of the band buttons.
And also the HPF filter screen thing…
.
.
