It would be very helpful to be able to use numeric keypad input for the IN and MIX delay settings in Avantis.
When setting a value to a longer setting, I have to keep turning the rotary so much that I forget to count.
As a request, there are 12 buttons as numeric keypad with numbers “0~9”, “. “ and “Clear”.
The other 3 buttons are “Delay ON,” “Back,” and “Next.”
These are used to activate the currently selected CH or move the selection directly from the numeric keypad screen.
As for the selection, it can be operated without hesitation if it can be linked to SEL and PAFL of CH and MIX.
I think Avantis will be reborn with the addition of a total of about 15 buttons for numeric keypad input.
Attachments:
You must be
logged in to view attached files.
.
