Me1 system And standard poe switch

Forums Forums ME Forums ME general discussions Me1 system And standard poe switch

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Nicola A&H Nicola A&H 3 weeks, 2 days ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #104305
    Profile photo of jacksonliam341
    jacksonliam341
    Participant

    Hello,

    I’m currently using an ilive t112 and idr48.

    And a QU-16. We are looking into the me1 system is it possible to use a standard Cisco Poe switch 300 series instead of the mu-1.

    We currently tour with an 18 piece band and are using a mymix system, but it will not work with the QU-16.

    I was thinking of keeping the current POE switch.

    Or, can I use one mu1 and my current switch to power the 18 me-1?

    Any help appreciated
    ___________________________________
    Gordon Bullard & Company

    #104315
    Profile photo of Nicola A&H
    Nicola A&H
    Keymaster

    Hi,

    You can find several threads on this forum on the topic. Also read the article at https://support.allen-heath.com/hc/en-gb/articles/4403292650641-ME-Compatibility-with-third-party-switch particularly regarding Layer 3 functions and power requirements. So in short, if your switch total power budget is enough to power all units, and you can configure it correctly, this should work.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.