LR output really low but plenty on the faders

Forums Forums Qu Forums Qu general discussions LR output really low but plenty on the faders

Tagged: , ,

This topic contains 3 replies, has 3 voices, and was last updated by Profile photo of Giga Giga 1 year, 10 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #108013
    Profile photo of Mark
    Mark
    Participant

    qu24 2trk out is going to a Home receiver to power a couple of Bose speakers on the patio. It seems like this just happened but the level on the LR is super low but I have plenty on the channels. There is not enough signal going out to feed the receiver and I can’t figure out why. See picture. Since there is no volume for 2trk out what has happened?
    Thank you

    #108014
    Profile photo of Mark
    Mark
    Participant

    Picture of Screen

    Attachments:
    You must be logged in to view attached files.
    #108016
    Profile photo of SteffenR
    SteffenR
    Participant

    Man… the screenshot is so tiny… I can’t see anything.
    Can you post a bigger image, please?

    #108029
    Profile photo of Giga
    Giga
    Participant

    Your stereo recording comes back to ST3 I think ? Don’t see that in the screenshot….

    My recordings are usually pretty low volume. No problem because I lift them up in my DAW but if you don’t do that first you’ll have to run your faders pretty high to get a healthy output volume.

    Giga

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.