itunes and mac

[mimmo]

Hi, a simple thing I hope.
I connect my apple pc to UBS B of my QU-16; my pc recongnize qu-16, but I ’m not able to listen music from itunes (even if I choose right input channel 3° stereo input).
thank for help. Mimmo

[moon]

You have to go to the MAc Audio Midi setup application and specify
QU-16 as the output for the MAC.
cheers,
Mike

[mimmo]

Thank you so much mike. I have just done it.but i can listen test speaker configure. But not the iTunes music. I note that i’m not able to move the orizzontale bars that increase the tracks db….

[Anonymous]

Apple Mac? PC? which one?
If you can hear the test sound coming back into the ST3 channels (which should be turned to USB-B input) then it must be a problem in your mac

dave NZ

[mimmo]

it’s a mac. Yes, I can hear mac test sound on ST3. But i cannot open any of the 21 channel outs (master bar too). Mimmo

[Nicola A&H]

Check that audio from iTunes is not going to Channel 1 & 2 on the mixer. If it is, you have to patch the standard OS X stereo output to a different USB out. In Audio MIDI Setup, select the Qu audio device and click Configure Speakers, then assign the stereo output to 21-22 for ST3.

Hope this helps.

[mimmo]

Hi nicola (are you italian?).
Itunes don’t have an option in which choose outputs (or pheraphs i’m not able to find it ?).

Anyway I immagine you mean to patch it in “Audio MIDI configuration” of my Mac.
Yes, I did this on my mac:
1- I choose QU-16 usb in “Audio MIDI configuration”
2- I choose in “configurazione spaeakers” stereo and I pacth the 21 for left and 22 for right (in this there are two audio test bottons for each speakers: if I push both of them they works well, and I can ear signal tests coming from mixer in right ways).
But nothing happen if I play Itunes (or i.e. Youtube ecc ecc).
(If could be usefull, in “Audio MIDI configuration” of my Mac it happen that I cannot move any of volume bars (output section)).

I dont’ know if i have to do something else in my mixer, but i don’t think so if it well works with signal tests.

[Anonymous]

Mimmo,

There is one more thing you need to check and/or set. Go to System Preferences > Sound and make sure that the output is set to the QU-16.

I hope this helps!

[mimmo]

..hi Tom…thank you so much …but… just done!! …(i’m checking if could be some conflict with my old edirol audio system i had before installed… i don’t really know!!

[mimmo]

A information on more…. i try to set usb B in CH1 and CH2 and they receive regolary music independently from what i do in midi audio set up. So it seem pc transmit only out in CH1 and CH2. …some suggestions?

[mimmo]

A further information: nicola is right. i try to set usb B in CH1 and CH2 and they receive regolary music independently from what i do in midi audio set up. So it seem pc transmit only out in CH1 and CH2. …some suggestions to change these channel into 21 and 22??

[Anonymous]

Hello Mimmo.
Do these pics help you?

[Anonymous]

and these pics?
Good luck
cheers
dave NZ

[mimmo]

Thsnk you so much for helping.
I attach my pics too…..

[mimmo]

Pic

[Author]

Posts