Individual FX-send to fader?

Forums Forums SQ Forums SQ general discussions Individual FX-send to fader?

This topic contains 2 replies, has 3 voices, and was last updated by Profile photo of Mfk0815 Mfk0815 3 years, 9 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
  • #94291
    Profile photo of Pidermite

    Is it possible to assign individual send to faders on SQ-series?

    What I want to do is to have two delays and two reverbs to lead vocals and chanege their levels very fast from a song part to another. And same time change dirty voc to clens. That’s impossible via menu-surfing. Do not want to do this via scenes etc as levels dirref very mauch according to space.

    Done this with Yamaha (QL/CL) using 3rd party MIDI-controller, probably would work with A&H as well, but could be nice to have this feature inside the console.

    Profile photo of SteffenR

    why are you post the exact same question on two different positions?
    you can ask one question if both series are supporting this… not that difficult

    Profile photo of Mfk0815

    To this with the current firmware you can use either softrotaries or multiple channels. One for the dry signal and one channel for each FX. Dont route those channels to the main mix, but use the channel fader to adjust the FX send.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.