I cant connect airport extreme and qu16

Forums › Forums › Qu Forums › Qu troubleshooting › I cant connect airport extreme and qu16

This topic contains 4 replies, has 3 voices, and was last updated by Profile photo of Dick Rees Dick Rees 5 years, 11 months ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • 2018/05/31 at 4:55 am #71389
    Profile photo of Boris
    Boris
    Participant

    Can somebody sent me step by step procedure for connection qu16 and airport extreme by airport utility program

    2018/05/31 at 11:30 am #71397
    Profile photo of MarkPAman
    MarkPAman
    Participant

    Without one here to go through, I can’t remember the exact steps. However, the bit that had me stumped for a long time was that you have to go to <Settings> <WiFi> on your iOS device and scroll down to find the Airport, before you can use the utility program. After that, everything was pretty simple IIRC.

    If that’s not your sticking point, I can probably find time this evening to have a look.

    2018/05/31 at 11:31 am #71398
    Profile photo of Dick Rees
    Dick Rees
    Participant

    https://community.allen-heath.com/wp-content/uploads/2014/06/Airport-Setup-For-IOS-Remote.pdf

    This can also be found in post #40308 by mamerica.

    2018/05/31 at 11:37 am #71399
    Profile photo of MarkPAman
    MarkPAman
    Participant

    That’s a good guide to using a computer & cable to do it, though it’s also possible to just use your iPad/iPhone and WiFi.

    2018/05/31 at 12:32 pm #71401
    Profile photo of Dick Rees
    Dick Rees
    Participant

    It should be a sticky in the Topic block.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.