Help with insert points

Forums Forums iLive Forums iLive troubleshooting Help with insert points

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of ddff_lv ddff_lv 4 years, 6 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #59061
    Profile photo of 320man
    320man
    Participant

    Please be gentle , a newbie .Trying to insert an analogue processor in to mono groups and /or main outputs using sockets at rear of surface .i can get the send to work no problem and the signal arrives at the processor ok ,however th only return path appears to be via channels ,usually 59/60 or thereabouts. I simply want it to return to the group or mains asa appropriate howev e cannot seem to change the return path on the screen.

    Obliged to have comments
    Regards
    Hugh

    #59111
    Profile photo of ddff_lv
    ddff_lv
    Participant

    Reference Guide part 2, page 27 describes this very clearly. By pressing assign button you get directly to patch field.

    ddff

    Attachments:
    You must be logged in to view attached files.
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.