Request: dBfs Meter, More Metering Options

[audiobean]

Hi, I work in broadcasting and therefore need more precise level metering. To meet our loudness requirements for the broadcast, I operate in the range of maximum -1 dBFS true peak. With the current dBu metering, this is not readable without an external analyzer. Therefore, it would be great to switch the metering from dBu to dBFS. Additionally, having the ability to adjust the clipping threshold would be helpful, as the master constantly shows clipping in this range.

[fenderbendr]

+1 to this

[Thompsoninst]

Another plus one here. I’m perfectly happy and even prefer to work in the VU scale, but a higher resolution meter would be helpful. In my experience, SQ, Avantis and D-live all share the early clip lights. It would be great to be able to adjust them or switch them from the current mode to a -1dBFS or +23 VU setting.

[Brian]

+1 – the is critical in broadcast mixing too and this is a very common function/use of the console.

[Tatsuya Nakamura]

+1

[Gregg Grey]

Oh Yeah +1

[SoundRyte]

+1

[SoundRyte]

Another +1 here. I also think it would be quite beneficial if there was a full-screen meters page available on the MixPad App and Avnatis Director. That way you could leave the MixPad setup with the Meters page and continue working on the Avantis as usual, while always being able to see what the meters are doing.

[alex.abel]

+1, also for dLive.

[Matze]

+1

[Matt]

+1. Would be really helpful.

[Sonovero]

+1 this can be really useful

[Gregg Grey]

+1

[Author]

Posts