Group to Matrix

Forums Forums dLive Forums dLive General Discussions Group to Matrix

This topic contains 3 replies, has 3 voices, and was last updated by Profile photo of mraiff mraiff 3 years, 4 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #71827
    Profile photo of mraiff
    mraiff
    Participant

    I don’t know if I’m missing something, but is there a way to select a group and adjust the sends to multiple matrices?
    I know you can do it the other way around, hitting mix on a matrix and choosing which groups go there. But is there a way to hit mix on a group and then send it to multiple matrices?
    Working with lots of groups and matrices, it would make my workflow a lot quicker.
    Thanks!

    #71830
    Profile photo of SteffenR
    SteffenR
    Participant

    as far as I know not at this time…

    #71851
    Profile photo of Wolfgang
    Wolfgang
    Participant

    I just tried it… it really only works in one direction, so select a matrix and then mix in a subgroup

    that surprised me a bit now, because normally it should also work in the other direction (i.e. select a group and mix it into the matrices).

    #71855
    Profile photo of mraiff
    mraiff
    Participant

    That is my thought as well. It just takes a bit more time having to select the matrices. And not having a way to look and see where a group is routed is quite odd. I’ll post it in the feature request as well.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.