fx1 not working

Forums › Forums › GLD Forums › GLD troubleshooting › fx1 not working

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2017/03/24 at 9:40 pm #62326
    Profile photo of retrojretroj
    Participant

    Hello,

    I’m not sure how I got my mixer (GLD-80) into this state exactly, but when I have FX1 assigned to a strip, the strip’s display stays dark and its buttons do nothing. I had been experimenting with the FX Insert feature when this happened. I’m running firmware 1.51. Any ideas how I can get my FX1 back to normal? Thank you,

    2017/03/25 at 10:35 pm #62335
    Profile photo of cornelius78cornelius78
    Participant

    It’s normal. When an FX engine is configured as an insert you don’t get normal send/return faders to work with. Instead (most, if not all IIRC) the FX have a dry/wet control. If you want your faders back you’re going to have to change the FX routing from insert back to mix>return.

    2017/04/15 at 2:26 pm #62906
    Profile photo of retrojretroj
    Participant

    Thank you so much. Sorry it took a while to follow up. This resolved the issue.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.