Control Surface to go Wireless?

Forums Forums dLive Forums dLive feature suggestions Control Surface to go Wireless?

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #63979
    Profile photo of VOLCANOJEFFVOLCANOJEFF
    Participant

    For us fader Junkies that like the I pad but still like to touch the actual faders and Knobs. Network control only from the surface. With a wireless network connection, lets only pass control from my surface to the Mixrack. Obvious that we could not send the Gigaace wireless, but is there any way of only passing the control via the network. A network control only mode?

    just a thought.

    Why, because is some cases I have set up my FOH position only to find I would have to move it in a hurry. The digital snake and CAT5 has helped much over the years, but, if we had the wireless possibility, it could be a breeze to push the surface around on a case/cart.

    Jeff

    #63981
    Profile photo of SteffenRSteffenR
    Participant

    the control network can be wireless already

    IP8 and IP6 should work in the wireless network too

    but I guess it will not work that flawless and no PoE without wires

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.