AR2412 GLD or AR2412

Forums Forums Qu Forums Qu general discussions AR2412 GLD or AR2412

This topic contains 14 replies, has 9 voices, and was last updated by Profile photo of [XAP]Bob [XAP]Bob 4 years, 2 months ago.

Viewing 15 posts - 1 through 15 (of 15 total)
  • Author
    Posts
  • #61540
    Profile photo of Tony
    Tony
    Participant

    Hi
    I own a qu 32 desk im thinking of getting a stage box however ive seen online there is one that reads AR2412 GLD as the model anonther just reads AR2412 i need to buy the correct one for my desk is there a differnce

    #61541
    Profile photo of GCumbee
    GCumbee
    Participant

    Just the AR-2412. The GLD refers to their next up series console.

    The stage boxes are

    AR-2412
    AR-084
    AB-168

    I put the hyphens in. You may see them displayed without hyphens.

    #61542
    Profile photo of Tony
    Tony
    Participant

    https://www.amazon.com/Allen-Heath-AR2412-Output-AH-AR-2412/dp/B00TKLF5HI

    Thanks Cumbee..please refer to the link and see my confusion..hope you puck it up

    #61543
    Profile photo of GCumbee
    GCumbee
    Participant

    It says FOR GLD. Read down below. It says for GLD or QU.

    New ones now are black. Not purple. I sell them. I have an older purple one along with the other 2. I have a GLD80 and QU16 I use for demo and small shows and TV audio I do.

    #61544
    Profile photo of Dick Rees
    Dick Rees
    Participant

    I don’t see any confusing information. It clearly states “FOR GLD OR QU” and gives the correct model #: AR2412.

    #61556
    Profile photo of Tony
    Tony
    Participant

    Let me break it down Dick..look at tge purple one it says gld ar2412…and the say its for both gld and qu ..then the black one says ar2412 and description says its for gld and they dont mention qu.but if u look at the pdf docs on a&h page they only mention ar2412 not gld Ar2412..but Cumbee did explain the purple one is the older one and he is selling the stuff

    Thanks

    #61560
    Profile photo of Nicola A&H
    Nicola A&H
    Keymaster

    The two models are identical other than the colour and the XLR tabs to lock XLR cables. There is no change in components inside the box nor firmware.
    Either would work with both Qu and GLD.

    #61563
    Profile photo of Dick Rees
    Dick Rees
    Participant

    Tony…

    The info you linked is NOT from A&H. It’s from a re-seller on Amazon.

    #61571
    Profile photo of Tony
    Tony
    Participant

    Thanks guys

    #61573
    Profile photo of dpdan
    dpdan
    Participant

    I love my purple boxes!!!!!!!!!!!!!!
    especially not having locking connectors 🙂

    #61583
    Profile photo of GaryW
    GaryW
    Participant

    So if I was to add a AR2412 to my Qu-SB, I’d get:
    — 16 extra mic pre inputs
    — I could map another 6 XLR’s as stereo inputs corresponding to St-1-3
    — Leaving 2 XLRs spare

    How many of the AR2412’s 12 output channels could I use?
    EG, for IEM pairs?

    #61584
    Profile photo of MarkPAman
    MarkPAman
    Participant

    As the AR2412s inputs are assignable, you can use all 24 and patch them where you want.
    You can use all 12 of the outputs, again, assignable from any outputs you choose.

    #61585
    Profile photo of Andreas
    Andreas
    Moderator

    …number of individual mixes is limited by the Qu. On Qu16 there are four mono and three stereo mixes. On Qu-SB/Pac/24/32 you can also use groups as additional mixes.

    #61586
    Profile photo of GaryW
    GaryW
    Participant

    Thanks Mark!

    #61592
    Profile photo of [XAP]Bob
    [XAP]Bob
    Participant

    And Main LR mix as well…

Viewing 15 posts - 1 through 15 (of 15 total)

You must be logged in to reply to this topic.