Alt output in SQ

Forums Forums SQ Forums SQ general discussions Alt output in SQ

Tagged: 

This topic contains 2 replies, has 3 voices, and was last updated by Profile photo of SQuser SQuser 2 months, 1 week ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #121095
    Profile photo of Dave
    Dave
    Participant

    How can I rout my LR to alt output from mixer and control it using a knob as in QU 32.
    I’m user of both QU 32 & SQ6 in my church. Qu 32 has a dedicated knob for alt output volume control.
    How can I rout the LR output & PAFL outputs to ALT output in my SQ mixer and control it using one of the assignable knobs…

    Please Help

    #121096
    Profile photo of nottooloud
    nottooloud
    Participant

    First, I’m assuming you have an SQ6 or SQ7, since the SQ5 doesn’t have soft rotaries. You can assign LR to A&B, but I don’t think there’s an output level available in the soft rotaries. You could send LR to a matrix and assign that to AB, with the matrix master on a soft rotary.

    #121101
    Profile photo of SQuser
    SQuser
    Participant

    > How can I rout the LR output & PAFL outputs to ALT output
    Maybe I’m misunderstanding it, but you can’t route L/R and PAFL on your A/B output sockets at the same time.

    But maybe alternatively to nottooloud’s suggestion:
    You could route Listen L/R to A/B and assign it a soft rotary of your SQ-6.
    Then you have PAFL adjustable on your A/B.
    And if no PAFL is selected (or PAFL of L/R is selected), then you have L/R to your A/B – also adjustable.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.