AHM16 GPIO momentary switching

Forums Forums Other A&H products AHM16 GPIO momentary switching

This topic contains 0 replies, has 1 voice, and was last updated by Profile photo of dizzyduck dizzyduck 2 months, 1 week ago.

Viewing 1 post (of 1 total)
  • Author
  • #115209
    Profile photo of dizzyduck

    Thought this would be easy, but can’t get it to work:
    I want to use the GPIO out ports on an AHM16 to control the projection screen up/down function. Port 1 is “down” and port 2 is “up”, both NO connection.
    I’ve made three presets (51-53) for this purpose, 51 that activates port 1, 52 that activates port 2 and 53 that resets both ports to ‘open’.
    All is working apart from that I can’t get preset 53 to automatically load. I’ve put a embedded recall of preset 53 in bot preset 51 & 52, after 1 second, but it doesn’t trigger. If I run preset 53 manually, it resets the GPIO ports to open, but not automatically. What have I missed?

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.