Remote shutdown in a fixed installation

Forums › Forums › Avantis Forums › Avantis feature suggestions › Remote shutdown in a fixed installation

This topic contains 3 replies, has 4 voices, and was last updated by Profile photo of Seth Seth 3 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 2024/02/01 at 1:28 am #119009
    Profile photo of Steve
    Steve
    Participant

    I would like to be able to use the Avantis in an upgrade for a church installation where the FOH is rarely used and the PA is almost always controlled by remote power sequencing and scene selection. We currently use a Crestron remote for system control.

    But being limited to using the console interface to initiate the shutdown sequence seems to rule out the Avantis (and apparently most all contemporary digital mixers) from use in this type of application.

    What I need is the ability to trigger a console software halt with either a TCP/IP MIDI command or GPIO input.

    2024/02/01 at 9:42 am #119013
    Profile photo of Tatsuya Nakamura
    Tatsuya Nakamura
    Participant

    +1

    2024/02/08 at 2:48 pm #119281
    Profile photo of AdamsFlys
    AdamsFlys
    Participant

    +1

    2024/02/15 at 8:09 pm #119493
    Profile photo of Seth
    Seth
    Participant

    + 1

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.