[JonathanParticipant]

Corrected file size 🙂

Attachments:

You must be logged in to view attached files.

[JonathanParticipant]

Just to give some context too… here are some photos of my AV room set-up… I am running the DLive S7000 for FOH and my control room is sending from these racks, using 2 DX32s and a DX64… in addition to our M1 system… I do have a Dante card that I can route the secondary feed to my ethernet distributer. I also have the gigaACE card on the 64, and a card on the S7000 surface… so, I am thinking I will get a SQ and run the livestream from that board. I can patch it in in the balcony or build a secondary location as a livestream broadcast room. Thanks again!

[JonathanParticipant]

I am leaning to the gigaAce port. On the spec sheet it says we can run independent with a separate DLive or Avantis system… we do not need that much power for our live stream board. Is a SQ board compatible. I have seen mix reviews, but the most recent seem to show that if I run out from my DLive gigaACE port, I can run into the S-Link on a QU and be good to mix the audio and send out from the SQ to our livestream. If I can spend 3K on a SQ board instead of 8-9K on the other, that would be great. The routing process is simple enough, just like our m1’s, but will it communicate correctly?

[JonathanParticipant]

Thanks everyone! I appreciate the help and wisdom.

[JonathanParticipant]

Yes, but we want to eliminate the chance of errors from operators accessing the house mix. If we give remote access to the main board fron the computer, they can accidentally mess up our very complex house mix… our desire is to run a separate board, independent of the main board.

[Author]

Posts