[I amParticipant]

Well all settings are as prescribed and noise is still present across all channels. It comes and goes. Turned off bluetooth and wifi to no avail.

[I amParticipant]

Yes HP Notebook. Later I will try to turn on airplane mode and see if that is the remedy. On the external USB ports I only have a mouse.

[I amParticipant]

Here it is.

Attachments:

You must be logged in to view attached files.

[I amParticipant]

Do I need to be connected to the board? Ok I’ll do that tomorrow.

[I amParticipant]

Is this it?

Attachments:

You must be logged in to view attached files.

[I amParticipant]

Was running off battery and trim is properly set.

[I amParticipant]

I will try that when I get home and post it. Thanks for your help.

[I amParticipant]

I selected computer devices as defaults.I will try a longer latency. Here is my usb info as attached. Also I can use airplane mode to disable wifi and bluetooth. I can’t try it right now as I have to run out the door. Thanks for all your help. Hope this works.

Attachments:

You must be logged in to view attached files.

[I amParticipant]

What do you mean ensure Qu is not selected as the standard interface? What should I select and where ? As far as the wifi can I just turn it off on the keyboard? 48k is selected and I have the buffer set to auto.

[I amParticipant]

The driver document I have says ST3 is 31&32.

[I amParticipant]

An HP PC with 16GB Ram.

[I amParticipant]

Well basically I’ve made all my connections on my DAW in Reason 8 and it shows audio in and out on the meters. Each channel is assigned one to one and my return is going from the main out to 31 and 32. The Qu24 has the audio assigned to each channel one to one and I have 31 and 32 assigned. Also USB streaming is selected. It seems pretty simple to me. I can record audio to the channel my mic is on. I have this static that comes and goes on all channels at the same time. I can email a copy of the channel as this forum cannot upload it.

[I amParticipant]

I have a HP Envy with a Intel pci HD controller. I have distortion as well. Any comments?

[I amParticipant]

Thanks for the help.

[I amParticipant]

I have a HP ENVY with a Intel graphics controller and I have distortion that comes and goes with USB B across all channels. I cannot record. Any solutions?

[Author]

Posts