Topic: ME-1 Label Template | Allen & Heath Digital Community

ME-1 Label Template

Tagged: DX-168, ME-1 Label

This topic contains 13 replies, has 13 voices, and was last updated by LilMic 5 months ago.

Viewing 14 posts - 1 through 14 (of 14 total)

Author

Posts
2016/11/03 at 12:18 pm #59063

Jedidavid
Participant

Does anybody have a label template they would share?

Thanks in advance!

2017/05/26 at 6:39 pm #63599

cmaus
Participant

Hello,

Here is a template I created in Excel for my ME-1s.

Cory Maus

Attachments:
You must be logged in to view attached files.

2018/04/16 at 6:49 pm #70452

Matt
Participant

This is very helpful. Thanks!

2018/04/17 at 3:12 am #70460

GaryW
Participant

Thanks, grabbed a copy too 🙂

2019/07/18 at 5:19 pm #85330

Soundpreacher
Participant

Thanks! I grabbed this too.

2019/12/04 at 9:15 pm #88068

TMAC
Participant

Thank you for the template. This is a great asset to have.

2020/09/22 at 1:59 am #95140

Doug
Participant

Thank you!

2021/02/01 at 2:54 pm #98513

ntxsound
Participant

Thanks, how are you applying this to the ME-1? Tape over, some type of sleeve, etc.

2021/02/01 at 5:28 pm #98516

cmaus
Participant

I just use a small piece of scotch tape on either end just to hold the strip in place.

2021/08/23 at 3:45 pm #103078

Wb
Participant

Thank you! I will use it well.

2022/05/19 at 9:24 am #107224

Gleam77
Participant

Here is an adjusted template that can be laminated and then cut out. It has ears so that it does not need sticking to the ME-1. Each musician can have their own drop on labels for the buttons.

Attachments:
You must be logged in to view attached files.

2022/09/20 at 6:54 pm #109131

Coop
Participant

Thanks

2022/09/22 at 1:37 am #109156

Chip
Participant

I hate to talk about a different piece of gear but does anyone out there have a template or label solution for DX-168’s

2023/04/26 at 6:59 pm #112611

LilMic
Participant

Thank you!!!!
Author

Posts

Viewing 14 posts - 1 through 14 (of 14 total)

You must be logged in to reply to this topic.