Forum Replies Created

Viewing 15 posts - 1 through 15 (of 65 total)
  • Author
    Posts
  • #68247
    Profile photo of I am
    I am
    Participant

    I believe you need a minimum of a cat 5E.

    #68221
    Profile photo of I am
    I am
    Participant

    Yeah mine works fine in a d snake expander port. Definitely try the local expander pour on the back of the Board.

    #68220
    Profile photo of I am
    I am
    Participant

    I guess I missed that part. Yeah I would definitely check it in the local expander port on the back of the board to confirm whether it’s working there or not. Meanwhile I’m gonna try mine to see what happens.

    #68210
    Profile photo of I am
    I am
    Participant

    Obviously you will also have to select on channel 26 and so on local expander two local expander three local expander four local expander five local expander six local expander seven and local expander eight on the subsequent channels As it looks for the D snake expander first unless otherwise programmed.

    #68209
    Profile photo of I am
    I am
    Participant

    Select channel 25 and then the processing button touch the preamp tab and make sure the socket is selected as local expander 1. Not D snake expander 1. Hope that helps.

    #67971
    Profile photo of I am
    I am
    Participant

    Not to mention you have a two year warranty with them.

    #67949
    Profile photo of I am
    I am
    Participant

    Time to call your reseller and have them ship you a new board ASAP.

    #66893
    Profile photo of I am
    I am
    Participant

    Well I’m confused. You said in your initial post that you did not want to do that that you wanted the levels to already be set properly that would entail being mixed. I’m out.

    #66874
    Profile photo of I am
    I am
    Participant

    At that point just use the USB drive and record a live two track.

    #66691
    Profile photo of I am
    I am
    Participant

    And for me they’re worthless.

    #66688
    Profile photo of I am
    I am
    Participant

    I have USB 2.0 and I have Distortion and as of yet no solution. I’m ready to sell the board. I already bought another GLD. Dante is the way to go.

    #66616
    Profile photo of I am
    I am
    Participant

    I wish I could even get mine working. I bought a new computer a Dell laptop with 16 GB of RAM with an AMD processor and discrete 20 USB controller and I have a noise comes in goes on the outside of my DAW. I use reason.

    #65958
    Profile photo of I am
    I am
    Participant

    Already read this post it changes nothing. I’m not even recording my inputs are locally enabled and I just sit there and watch sporadic signal noise into my DAW.

    #65946
    Profile photo of I am
    I am
    Participant

    Do you mean select in your Daw?

    #65879
    Profile photo of I am
    I am
    Participant

    Can anyone tell me if I should disable PowerNow in my AMD CPU Bios?

Viewing 15 posts - 1 through 15 (of 65 total)