[ShowtimeParticipant]

Firmware is already online, hot plugging d-snake is the connection between gld and ar2412?

The isseu that the me-1 then lost settings is this update for?

Richard

[ShowtimeParticipant]

Don’t forget that 1.7 has routing problems.

Richard

[ShowtimeParticipant]

auto is for people who are lazy, sound you make with you ears not auto.

Richard

[ShowtimeParticipant]

I gave the tf mixer a closer look at the prolight & sound, i miss a lot at the board, it to me plastic fantastic.

+1 for qu

Richard

[ShowtimeParticipant]

gld has 20 mixbusses, lrm 4 aux 2 matrix is 12, so you have 8 busses left for iem, if use me-1 system for monitor then it would do it.

Sd8-24 is not much larger then the gld?

Richard

[ShowtimeParticipant]

The gld has a clock inside…..

[ShowtimeParticipant]

I had the same problem.

Richard

[ShowtimeParticipant]

More output’s at the foh : buy mmo card and avion AN-16/o, 16 output’s at the foh.

If you wan’t to use a graphic eq on input’s, use mix bus.

You can leave the panning out of the gang, then you can pan every channel how do you like it.

Richard

[ShowtimeParticipant]

Buy gld……

[ShowtimeParticipant]

There are several options.

1) ME1 Feed you can select where to pick them, Bottem screen pop up tab
2) Per aux you can select the pick point (post headamp before gate, post eq is before comp)
You can find this in the aux routing screen just below the routing tab
3) You can make two faders of the vocals (1 for monitor and 1 for foh)

[ShowtimeParticipant]

Wil the ducker also come to the gld?

It is very silent there after 1.42

Richard

[ShowtimeParticipant]

Buy a me1?

[Author]

Posts