Forum Replies Created

Viewing 15 posts - 1 through 15 (of 257 total)
  • Author
    Posts
  • #127744
    Profile photo of ShowtimeShowtime
    Participant

    Replace the sq7 at foh for avantis with a waves and dante card.

    In the sq 7 and x32 a dante card and you can splitt al the signals over dante.

    Not the cheapist but the most cleanist solution.

    Richard

    #127582
    Profile photo of ShowtimeShowtime
    Participant

    There is a page in the reference guide where is written was is done on scene level and on showfile level.

    There you can see that mono/stereo is not saved in scene’s

    #126089
    Profile photo of ShowtimeShowtime
    Participant

    maybe try a different kick microphone, i use the lewitt dpt640rex and there is always enough bass

    #124435
    Profile photo of ShowtimeShowtime
    Participant

    i cam from qu and gld, in sound quality sq is a step forward, also with the ar2412.

    For the price of the tascam with stageboxes you can also buy sq6 with addon pack’s then you have almost the same as gld.

    Richard

    #123351
    Profile photo of ShowtimeShowtime
    Participant

    And what’s the point?

    You bought the console without proper testen if the sq5 is what you need.

    I don’t recognize this problems.

    Richard

    #120328
    Profile photo of ShowtimeShowtime
    Participant

    I had the same problem, in my unit the psu was faulty.

    Contact service to get the psu replaced.

    #113201
    Profile photo of ShowtimeShowtime
    Participant

    How is it build in a case? Is there enough airflow. I used my console in 25 degrees unprotected in the sun with no problems.

    #110597
    Profile photo of ShowtimeShowtime
    Participant

    Sq dante uses the hc chip. I havenend read an artikel about that replacemend.

    Till that time sq dante card’s are trade for organs.

    Richard

    #110591
    Profile photo of ShowtimeShowtime
    Participant

    There is no ethersound card for sq serie’s, but there are 3th party solutions to convert madi or dante to ethersound. If you want to use the ethersound stage boxes, buying ar2412 with ab168 is cheaper and you have direct pre amp gain on the console instead of a laptop.

    #109098
    Profile photo of ShowtimeShowtime
    Participant

    Audinate can’t deliver any brooklin card ore hc chip. They are working at an alternatif, but if you get lucky there will be somerhing end of this year. This is Information that is foundable on the internet. Every distributor can tell you this. If a&h had the card they will sell them, they can use the money.

    #107552
    Profile photo of ShowtimeShowtime
    Participant

    You can send the whole band to a mix group.

    Than you send the mix group to the main.

    If you mute the mix group the band is muted to the main but not the monitors.

    Richard

    #107472
    Profile photo of ShowtimeShowtime
    Participant

    For the cost you can buy al lot analoog multi.

    Richard

    #106721
    Profile photo of ShowtimeShowtime
    Participant

    It is not only the fantom power, it is also impediance.

    There is a lot writen on the internet why to use a di box en witch di box for witch instrument.

    Guitar is mostly high impediance and the dx168 is low impediance, without a di box there will be a loss of sound.

    Richard

    #106654
    Profile photo of ShowtimeShowtime
    Participant

    Control port is for patching only without audio transport

    #106446
    Profile photo of ShowtimeShowtime
    Participant

    I think there is something going wrong.

    You buy a piece of gear that suite’s the work you have.

    If an sq has al the functions you need an the correct price, you buy an sq.

    If an sq doesn’t has the tools you need you buy an other piece of gear what has the tools you need, you don’t buy a piece of gear that maybe in the future get the tools your need.

    For small job’s i own one of the first sq5’s for larger jobs i own a dlive.

    That simple it is.

Viewing 15 posts - 1 through 15 (of 257 total)