[PerttuParticipant]

I get what you mean. The mute doesn’t work from the smaller view on top, you have to be on the bank view. Picture attached. I’m sure this has been done for a good reason.

Attachments:

You must be logged in to view attached files.

[PerttuParticipant]

Option 2 didn’t load. So here’s how you do it with the Soft Rotaries.

Attachments:

You must be logged in to view attached files.

[PerttuParticipant]

Hi!

You have at least 3 options to do your Dub Sends.

1. Put your Delay Send to a fader near by your Inputs
2. Assing the Soft Rotaries to be your sends (Setup)
3. Assing the Strip rotary to be your Delay send

Please check the pictures below how I do it:

Attachments:

You must be logged in to view attached files.

[PerttuParticipant]

One of the great features of dLive is that it indeed powers up in the exact last state. Did you get yours behaving the same Julian?

[PerttuParticipant]

Oh One of my favourite subjects!

I would need:

Auto-tune. Slate Metatune would be a good starting point, if AH can source it inside Audiotonix.

-Distressor. Again Slate Digital FG-Stress is already a great model.

-Good Limiter with LUFS meter. Simplified FG-X Mastering would do.

-TrackSpacer style DYN8. EQ that analyses an external sidechain.

-Nicer Reverb. Bricasti M7-style. Slate has this already on FG-BM7.

[PerttuParticipant]

The need for MTC is still there. I’m really hoping to get this in the V2 Software. PLEASE.

[PerttuParticipant]

”Crossfades affect Input faders and Pan, Mix faders, DCA faders, send levels and Pan.”

Firmware Reference Guide, page 46, V1.9

[PerttuParticipant]

Screenshot

Attachments:

You must be logged in to view attached files.

[PerttuParticipant]

Hi,

At Hög we are using these screens on our Audio Control Packages: https://lilliputdirect.com/lilliput-hdmi-monitors/lilliput-13-inch-hdmi-monitors/TK1330-NP-C-T

The Picture quality is very good but as stated above, the touch functionality is pretty much useless. It doesn’t map correctly.

With best regards,

Perttu

Attachments:

You must be logged in to view attached files.

[Author]

Posts