When attempting to set up a Virtual Soundcheck with Logic using Dante, I encountered pretty much the same error in Dante Controller as Allie did.
Dante Controller has discovered an address for device ‘dLiveMixRack’ that does not match the subnet configuration of the local Dante interface ‘en0’.
Possible causes of this problem include:
Local Dante interface has link local address which is different to the device subnet
Device has a link local address which is in a different subnet to the local interface
Details:
Resolved device address on Dante interface is Link Local 169.254.100.20
Local address on Primary Dante interface ‘en0’ is 192.168.1.111/255.255.255.0
The Ip addresses of the 2 devices on the network are:
Stagebox: 192.168.1.70
MacBook: 192.168.1.111
DVS: 192.168.1.111
Router: 192.168.1.254
DVS version 4.1.2.3
Logic Pro X version 10.4.2
MacOS version 11.7.10
I have a Dlive C3500 connected via GigaAce to the CDM32 Stagebox. The CDM32 has a Dante Card that is hooked up to our network switch. The IMac with Logic, Dante controller, and Dante Virtual Soundcard is also connected to the same network switch.
A weird thing of note is that we have been successfully recording our services to Logic through Dante for a while. I don’t understand how we have been able to continue to record like that with the error.
Im hoping I’m just missing something here. I have been trying to trouble shoot this for a while, and I don’t see how I can change the local address on primary Dante interface ‘en0’ from the 192 ip to a 169 ip in within the subnet. Any help would be much appreciated!
