[MJPA HireParticipant]

#Mike C
Hard reset and firmware reinstall seems to have worked. Thanks.

[MJPA HireParticipant]

I’m having the same problem with one one my QUPac’s when it’s turned on before connecting the Router Cst5e into the network socket. I reboot of the desk all (connected except outputs) gets it passing audio as normal

[MJPA HireParticipant]

I have the following problem, you can select the USB channels in the ME (I assigned the USB inputs to stereo inputs on the desk). and when you assign these inputs to a group on the ME you can see the group name on the ME display but you can’t access the group to adjust levels etc.

[MJPA HireParticipant]

Hi. It’s a stereo sub group the vocal channels have been assigned to it. I know the assignments are good because I’ve routed the subgroup through the main left and right PA sends and turned off the individual vocal channels from the main L&R and I can hear the vocals on the PA when I move the subgroup fader up in the mix.
Any compressor I select in the subgroup works but shows no indication of levels or compression on the meters or bar graph.

[MJPA HireParticipant]

The Screen on my C2500 has frozen a couple of times during show, had to reboot to clear, no particular reason. used iPad for screen functions during freeze.

[MJPA HireParticipant]

+1

[MJPA HireParticipant]

Hi

Are the air vents on the SQ illustrated in the CAD drawings so flightcase manufactures can cater for them in their designs.

Cheers

[MJPA HireParticipant]

Hi OPW_TES

Could you tel me where you sourced those QLab strings please.

Many thanks

Martin

[MJPA HireParticipant]

Some of the video’s didn’t play on my mac, so looking forward to watching the recorded version.

Did the ME500 winer get announced yet?

[MJPA HireParticipant]

Thank you for your help.

[MJPA HireParticipant]

Can I then send light dmx signal down that route or say a separate feed from an intercom system

[MJPA HireParticipant]

So, an update on using Airport Extreme as a router for the GLD.

After many attempts of different combinations of i.p addresses on the GLD desk network setup screen the only way the GLD could be seen for longer than ten minutes before a mixer connection error message came up on GLD remote was to have the dhcp turned on, on the GLD……

[MJPA HireParticipant]

I’ve tried both frequencies Chris, I am going to change routers, Apple seems the way to go but just wanted to know if anyone else had used it on the GLD just to double check it would work OK, I think I’ll get one and worse case scenario if it doesn’t work with the desk I’ll swap it with my home router and have the Apple at home.
Cheers guys

[MJPA HireParticipant]

Thanks dcongdon yes, its a pity there isn’t an audio socket on the extreme, I can see how useful that feature is on the express. It’s just that I have had trouble with remaining connected over sometimes relatively short distances, especially in theatres with my current router for some reason, although it is a fairly high spec one, the extreme offers direct beam technology and I thought that might improve connection over distance more efficiently.
Cheers

[MJPA HireParticipant]

Kenelm
The thunderbolt to Ethernet adapter works fine.
you don’t need two licences. mixing on your desktop doesn’t require dante.
Cheers

[Author]

Posts