Forum Replies Created
-
AuthorPosts
-
2022/03/26 at 10:30 am #106562
Hi
You can also use normal Inputs for the Fx which you wanna duck… you lose Inputs but you spare bus outputs…
2021/12/20 at 11:02 am #104970We copy scenes from show to show using the following procedure.
1 Load the show with the desired scene
2 Go to scenes
3 copy the scene
4 Load the show you want to add the scene
5 Go to scenes
6 Select an empty scene
7 Paste scene and name it
Done2021/03/26 at 9:42 am #100161Same here. It tells me first that the display can’t shut down. It never turns of at the first time…
2021/03/25 at 3:52 pm #100135Its in offline mode. Its just a control app and its overloading my probook. Tried to reinstall, no changes. The memory usage isnt the problem, but the cpu goes up to 80% usage even whenn i do nothing. Just a loaded default show….
2021/01/23 at 1:14 pm #98293Lol 😂
It’s announced since end 2019, maybe 2022… 🥸🤬
2020/12/31 at 8:44 am #97765It’s a farce, actually quite embarrassing for a company like Allen&heath. The whole thing borders on fraud.
The advertising text for the Avantis doesn’t really apply either.for example:
“With the UI for continuity, you can see more of what’s important and interact with it right away. This allows for a seamless connection between the physical controls and the displays.”– no, it’s not immediate, rather delayed and confused, a lot of delays really
it’s a shame…
2020/12/25 at 11:32 am #97636You’re absolutely right. I can’t recommend anyone to buy a mixer that still has slow and faulty firmware after a year. and a&h feels no motivation to finally fix this. I can only advise everyone against buying an Avantis.
2020/11/26 at 4:19 pm #96617I really hope the new firmware will fix some of these problems…
overall i’ve to say A&H is doing a great job, hope this time to;)
thanx, Mat
2020/11/26 at 4:08 pm #96616Thanks for the honest and fast respond!
Of course i know the worldwide problems of all industries because of covid, but i guess it would be a good idea to tell the user community that the earlier tentatively scheduled releases are far of the plan. other industries also inform their customers about delays or other problems currently occurring.
the general lag of the GUI and the screens is a known issue, also the copy paste screen lag is a known issue and is discussed in this forum.
In my opinion, this should be noticed by every developer because these lags are obvious and general … I first had a rental desk due to delivery delays and now I have my own desk. I tested both over several months and both had exactly the same lags, so seems to be general.
I know this issues are only a big problem in an advanced use, sometimes i just switch layers for just a second to change levels or anything else and if the screens are just a bit behind the faders, its s a workflow brake…https://community.allen-heath.com/forums/topic/overall-lagy-expierence (…. earlier post about mixer lags… )
Yes you are right, 13 months earlier firmware 1.1 and director software release was tentatively scheduled for end of 2019. 13 months later it feels like a fool, also if it was just tentatively. (sorry i feel like that;)
2019/10/07 at 6:45 pm
#86884
REPLY

Nicola A&HKeymaster
Yes, an offline editor is planned, but not for V1.0. Tentatively end of the year.I really hope the new firmware will fix some of these problems…
overall i’ve to say A&H is doing a great job, hope this time to;)
thanx, Mat
2020/07/11 at 9:38 am #93283try to add ch 10 to dca3 and remove it, guess this will solve the problem.
had this bug several times…2020/05/17 at 7:47 am #91890Shure i have the D Pack, but its not in it 🙁
-
AuthorPosts