[LishinskyParticipant]

Brad, im not asking to replace the function of the DCA’s to what the MCA does. at the moment the option for MCA is excluded from the main mix. i think this option should be available for the main mix as well.
i just mentioned an example where the average fader position of a given group drifted outside of the comfort zone during a show.

[LishinskyParticipant]

I Know what a DCA is!! it does not move faders. MCA does!!
lets say you have a group of channels with a good relative balance between them, and you would like to readjust there fader position respectively!!
of course you can achieve the same gain change by moving the DCA but what I’m looking for is to actually move the faders so they can all fall within the comfort zone ( around the unity point 0 ) where the fader has the most resolution. if i have to move all faders individually i will have to reconstruct the balance of that group.

[LishinskyParticipant]

No New EQ’s? Yet Another Compressor? Sounds disappointing so far.

[LishinskyParticipant]

No Group Spills?

[LishinskyParticipant]

+1

[LishinskyParticipant]

Actually i have the same problem when recording from the C3500 thru the Waves card. recording is always corrupted.
when I’m recording on the same computer from my S7000 thru Waves Card it works as it should.

WLCC! if the problem was incompatibility with high sierra then how come your first recording was fine??

are you sure your problem is fixed??

Eli Lishinsky

[LishinskyParticipant]

Thank you Nicola!!

[LishinskyParticipant]

+1 I Totally agree!! much more important then RTA overlay.

[LishinskyParticipant]

Thank you Steffen, but you can not adjust delay time in the east area!! and even if you could, what i need is to adjust global tempo so all my delays will sync correctly.

[LishinskyParticipant]

The Global or local Tap Tempo For the delays to synchronize. taping the soft keys has very inaccurate results! could be nice to be able to fine tune.

[LishinskyParticipant]

I Own 2 Live systems S7000 + DM64
and C3500 + CDM64
Both equipped with 1 Dante card and Waves 3 card.

Located in Brooklyn NY

[LishinskyParticipant]

It Is Useful!!!

[LishinskyParticipant]

i also think that an option for the aux pans to follow main pans is a must have!!

[LishinskyParticipant]

Sure thats exactly what i meant by “selectable source” for the detector.
yet nobody seams to be excited about this feature besides the tow of us!! 🙁

[LishinskyParticipant]

+1

[Author]

Posts