Forums › Forums › dLive Forums › dLive General Discussions › V 1.80 ?
Tagged: firmware v1.8
This topic contains 38 replies, has 18 voices, and was last updated by Ben A&H 4 years, 10 months ago.
-
AuthorPosts
-
2019/02/06 at 9:41 pm #81793
does anyone really know exactly what’s coming in the 1.80?
you only hear rumours everywhere, I find that a bit unprofessional.
2019/02/06 at 10:26 pm #81794same here….
2019/02/07 at 12:30 am #81800they will have MCA-Groups, work like DCA but moving the faders og the assigned channels
then there will be another Optic-Compressor for the input channels an switchable input socet groups A B D E for each input Chanel2019/02/07 at 9:41 pm #81818Well, I’ve heard those things too, but I can’t imagine that that’s all.
No bugfixes? No further improvements?
Why is there no official information?
You could do that better, please don’t let us users stand in the rain. 😉2019/02/08 at 2:15 am #81820No Group Spills?
2019/02/08 at 2:22 am #81821No New EQ’s? Yet Another Compressor? Sounds disappointing so far.
2019/02/08 at 11:34 am #81825Here’s a YouTube video from NAMM showing a preview of v1.8
2019/02/08 at 2:34 pm #81831Now its gone- what is this secret bullshit. We who have no possibility to go to NAMM or ISE been let down. This isnt A&H as i know them
2019/02/15 at 1:08 am #81974
AnonymousProbably just means the update is not coming as soon as we would all like.
Sent from my iPhone using Tapatalk Pro
2019/02/18 at 9:36 pm #82065Agreed. Would like more info about V1.8.
2019/03/21 at 8:54 am #82853If you haven’t done so already, there is still time to register for today’s webinar on V1.8. See you online.
https://register.gotowebinar.com/rt/18012676249456069142019/03/22 at 12:51 pm #82886Thank you for a great update!
We are using three new features:
– MCAs to allow DCAs to affect monitors
– Talkback groups
– ABCD input switchingAll of these are very helpful. Thanks!
2019/03/23 at 12:24 am #82909From my side also many thanks for the update.
there are again many useful things.
TJCornish has mentioned a few important things.I am especially happy that my personal wish was fulfilled with the Peak Hold Reset on Softbutton. That really makes me happy, because I will use this solution extensively.
The Latching-With option on the C-Series consoles will prevent the extreme finger splits in the future 😉
Also the DCA buttons in the bank view are good, the button has been there for a long time, but without any function.
The list also says that gigaACE is now VLAN compatible. Wasn’t it before? It’s a Layer2 solution, that should have worked already?
And I’m happy that the DCA and softkey setup windows with the blue dots make it easier to see in which tabs functions are set. I hadn’t thought about this solution at all, thank you very much for that, that will further improve the overview!
And then the display of the dB values in the routing screen! Wonderful!
It goes ahead!
Now only a few little things are missing… 😉2019/03/23 at 12:53 am #82910Supplement:
I noticed something in the Director:
whenever I restart the Director, the mix field at the top right is displayed with a red border. This display should only be active if the MIX button was pressed in a DCA (spill).2019/03/23 at 11:34 am #82913Correction:
i was wrong, the red border really only appears when i use the mix button in a DCA group.
Sorry for the wrong message, it was a bit late yesterday… -
AuthorPosts
You must be logged in to reply to this topic.