[JimmyLee]

fourth boot up failed with stuck on initialising 🙁

[JimmyLee]

I’m also still struggling with this issue. Just today tried the steps from Keith. (previously have tried them before prior to 1.2.1, but not straight from 1.1.0 to 1.2.1.). Will see how it goes, so far the last three boot ups have worked fine, we shall see.

[JimmyLee]

I had drop outs during our last gig with my iPad Air. I changed the CQ over to 5Ghz wifi and it solved it, room was probably swimming with a boat load of 2.4Ghz, the switch helped. cheers

[JimmyLee]

you’re dead right, apols, there’s a step to overwrite the scene before going to break

[JimmyLee]

Really? I’m looking forward to the fix. I did some testing, and it doesn’t matter if I have USB or SD cards plugged in, the unit will still do it (network and bluetooth stuck on initialising). A shutdown and restart usually fixes it. Assume this will come in an FW update. cheers

[JimmyLee]

You’re welcome. I tried this at an actual gig last weekend and it worked perfectly. I just set soft key #1 to my main (gig) scene, and soft key #2 to a duplicate scene but with all mics muted and the BT audio turned up (for intermission). Hit key #2 for intermission, key #1 when the band came back for their 2nd set.

[JimmyLee]

my unit is doing this randomly. wifi and bluetooth just say ‘initializing’ after boot up, nothing fixes it except a shutdown and restart. I’ve re-flashed the firmware and done a factory reset. I have an SD card in it at all times, I haven’t experimented without the card in it, will try that.

[JimmyLee]

I wanted something similar. What I ended up doing is using ‘scenes’. So say one scene is my mics/etc unmuted (band playing), another scene is everything muted except bluetooth (and some vol up). Then I assigned those two scene’s to two of the soft keys. At the press of one soft key it switches to my scene for intermission/break, and another is back again…

[Author]

Posts