[jheimbergParticipant]

Ok, that makes sense.

NEXT question: About output routing/etc.

At the install, there’s three stages: From left to right, stage L is a band, Stage C is drama, Stage R is a band. Low ceilings/amateurs/etc all conspire for feedback possibilities. My thoughts were to route the drama lavs and headsets in such a way that they are feeding a lower signal (or none at all) to the speaker directly above the ‘drama’ stage, but still feed all the rest, and make it invisible to the operator what’s happening.

How would I go about this? Obviously I’ll need to have each speaker (powered boxes) connected to discreet outputs, but what are the things I need to be looking at in the iLive?

http://www.soundadvicetraining.com

[jheimbergParticipant]

The install is in a building with no existing network, and the iLive will be the only networked device at that location, so we can build the network to suit.

We’ll install an internet connection, security enabled router w/wifi for laptop ‘monitor land’, and then have the option of remote login.

It seems the simplest would be to be able to connect to the IDR directly, rather than to another PC already connected, but maybe not, thoughts?

http://www.soundadvicetraining.com

[Author]

Posts