[unbreakParticipant]

I’m sorry… screenshot attachment failed…

Attachments:

You must be logged in to view attached files.

[unbreakParticipant]

I’m using iPad Air 4th gen. Mod. MYH62TY/A
IOS 15.0.2

As you see in the yellow circle, the mute buttons are cropped and unpushable. Sometime flashes appear randomly on channel strip area.
UI does not fit the display (red arrows)

[unbreakParticipant]

yes, sometime UI flashing randomly but, most important, some UI parts are gone. The app is unusable. Please, update it

[unbreakParticipant]

@markpaman
I can’t compromise my performance using any devices during the execution, and then, between one song and another one, Is more easy to use Softwkeys like I do.
What that I ask to the team, is a feature to make the Qu-Pac more usable like a many other Audio Interfaces that have this possibilities (almost all). All musicians that use IEM connected directly to the interface knows what that I mean. Simple 🙂

[unbreakParticipant]

@andreas:
Obviously is already switched in non additive mode.
You got it!
What that I need is to have my output (Group 7-8 Mix mode) as a default listening on my headphone but sometimes I need to listen (for emergency) other outputs and then go back to my own. I explained bad about the PFL in the softkeys. You can already do.
At the moment I use Softkeys with assignable PFL to switch between outputs. It works well but it would be better if buttons they had a latch-unlatch to go back immediatly on my outputs. The Softkey red lights help me to view what that is on/off. Redlights off would mean that I listen my default outputs because when I play I have no time to reason what is the situation.
That is the reason why I ask the same function as Alt-out on the headphones.
I Hope I was clear 🙂

[unbreakParticipant]

@andreas: is exactly what that I do… I have already written about that but I repeat that it is not practical when you have to control also other outputs and then go back to my pfl… All that things while you’re playing…
It would be better to have a default configuration like a Alt-out. Use pfl to check other outputs when it needed and push a softkey with PFL Clear.
That is the right way to go back immediatly on my listen.
I would totally agree with you if I were to do only the engineer but when you do while playing drums, it becomes more complicated. Believe me 🙂
I can suggest an alternative solution:
adding the possibilities to assign your preferred PFL to the SoftKeys

[unbreakParticipant]

I bought the Qu-Pac to simplify many things that I do when I’m playing.
i don’t want other machines. It would be extremly easy for me if they add a menu for the headphones with the same possibilities of Alt-out.
Remeber that Qu-Pac is not only a Rack mixer. I use it with a very complex configuration with mixed source signals (local + usb streaming).
Many audio interfaces have the features that I ask to the staff (headphone source config). It’s very simple to add this function to the Qu-Pac…I think.
Pleeeeeeeeeease 🙂

[unbreakParticipant]

I want to thank you all for every suggestion but I think that you guys aren’t focused on what is the problem. My english is poor, maybe I can’t explain better what is the real problem. I already tried all your suggestions that already knew. Believe me, I’m not a beginner. As a FOH engineer I use all main consolles and I know all routing possibilities, even of the Qu series but this problem it has nothing to do with this knowledge. Instead, as a drummer/foh engineer at the same time, it would be more simple with the same options as a Alt-Out. I know, I could use it with external phone amp but this output is already in use by bass player.
I hope that this feature will be implemented. In meantime…my temporary solutions and your suggestions are all the same 🙂
Thank you all

[unbreakParticipant]

That is what that I do at the moment but is not confortable when you are playing… regardless of the touch screen or IOS devices you use.
I never said that it is not possible to listen to the different mix but it’s just not so easy, especially if you listen other mixes for any emergency while you’re playing…
What that I ask is to have the same options of “Alt-Out” on the headphone.

[unbreakParticipant]

cannot hear the click in this way… unless you want to hear on the pa 🙂 I should hear both pfl (LR+Click) but I couldn’t adjust the click volume just on my headphone. Other musicians have click as well

[unbreakParticipant]

It’s true, but if you were a musician would you use the PFL for your in-ear monitors? I think no…
This is my situation: I am drummer and sound engineer at the same time, as you can see on https://www.youtube.com/watch?v=4RXwQiPPlI8
I use PFL to check other mixes of every musician but I have to listen the PA mix (without clik). To do this, I created a Group (or stereo mix) and it would be perfect to route this signal to the headphone jack without using the PFL…

[Author]

Posts