• I had to do monitormix for the main act with my QU24 and to mix the support act with monitors adjusted at FOH (iLive).

    I decided do use the AUX sends and the EQs of the iLive and connect the AUX sends of the QU to the External Inputs of the iLive auxes. So nothing needs to be rewired during changeover. Everything went perfect, until I switched…[Read more]

  • Saw this in the internet. Is ths a fake, a wishlist or can someone see in the future? ;-). Maybe someone from A&H can comment this? Thank you, Andy

  • @BRS … that’s not the case … as MarkPAman wrote… the panning for FOH doesn’t have anything to do with the panning for the monitors. If you leave the pans for the mixes 5-6, 7-8, 9-10 in the center psosition,the channel is fed to both sides of the stereo mix. If you connect your monitor amp only to the left or the right output you’ll get…[Read more]

  • @BRS … that’s not the case … as MarkPAman wrote… the panning for FOH doesen’t have anything to do with the panning for the monitors. If you leave the pans for the mixes 5-6, 7-8, 9-10 in the center psosition,the channel is fed to both sides of the stereo mix. If you connect your monitor amp only to the left or the right output you’ll get…[Read more]

  • I already know this, but the desk is isntalled in a city hall, and the customer wants the fader to be the master fader. It seems, that we still have to use the headphone output to feed the monitor amplifiers. Maybe this feature will be implemented in a future update.
    Thank you,
    Andy

  • Ganging would be great, but even a channel link function like in the QU series (with the choice not to link pan, fader and mutes) would be very helpful. Andy

  • With the new firmware it’s possible to route the monitor output to an XLR output. But the volume can only be adjusted via the tochscreen. I’d like to use one of the rotary controls for this, which seems not to be possible at the moment. That’s why I still use the headphone socket. Please add this in a future update, or if it’s already possible,…[Read more]

  • A “mono sum” button on the screen for the matrixes would be great. Please also for the QU mixers. Then I could get rid of my adapters with resistors which now do the summing analogue after the outputs.

  • Andy replied to the topic SQ Questions in the forum SQ general discussions 1 year ago

    Thank you. Some People like to work with the FX sends, others prefer to work with the returns. The QU shows the FX parameters in the send and the return processing window, so for editing them it doesen’t make a difference. I hope A&H will add this (and some other things) to the SQ software soon. The SQ is a great desk, but in my opinion there’s…[Read more]

  • Andy started the topic SQ Questions in the forum SQ general discussions 1 year ago

    Hello … I just installed a SQ6 in a local city hall. As I was trying to configure the desk to the needs of the customer, I had some problems/questions. Maybe someone can help me or at least answer my questions. Here they are:

    FX: when I press SEL on a FX return, my QU shows the FX parameters, I can edit them there and I can switch to EQ view.…[Read more]

  • I miss the possibility for the Matrix Masters to be controlled from a DCA. With my iLive I use matrix outputs to feed the PA, nearfills and/or delay speakers and controll the volume of all outputs with a DCA to keep the relative volumes constant, when I usethe master DCA fader. With the QU I usually use auxes, which can be controlled from a DCA,…[Read more]

  • Andy replied to the topic Subgroups in the forum SQ general discussions 1 year, 6 months ago

    I don’t own a desk, but I found this in the manual:

    In SETUP – MIXER CONFIG – BUS CONFIG you can set the number of groups and mixes. There are 12 stereo mixes and you can choose how many of them you want to use as subgroup instead of an aux mix. For example, you want to have 2 subgroups, than there are 10 aux mixes left. And you can select, if a…[Read more]

  • Andy replied to the topic SQ V1.1.0 in the forum SQ general discussions 1 year, 8 months ago

    I think release notes are important for all who are interested in the SQ consoles. You can’t make a decision which mixer to buy, when you don’t know about the features.

    Therefore I can’t imagine, that this informations will not be available soon.

  • Andy replied to the topic SQ V1.1.0 in the forum SQ general discussions 1 year, 8 months ago

    I think release notes are important for all who are interested in the SQ consoles. You can’t make a decision which mixer to buy, when you don’t know about the features.

  • You can use DCAs.

  • Andy replied to the topic SQ V1.1.0 in the forum SQ general discussions 1 year, 9 months ago

    Do you plan to make the release notes and the reference guide available for others as well? I’m sure, many people are interested.
    Thanks, Andy

  • I never had problems with any router I tried. There are two things maybe everyone of us once accidentally did wrong. Check the wiring. Make sure that the network cable is plugged into the network connector and not into the D-Snake connector. Then make sure, you connect the other end to a LAN port of the router, not to the WAN/internet port. All…[Read more]

  • If they put the preamp section to the correct place, I’d like to buy one 😉

  • I can’t imagine, why you want to go back to an old firmware, but I can send you the file 1.71 or 1.73 or even 1.40. If you want it, just send me PM. But this will only work with the desk. You will not be able to install the iPad app for any old firmware version.

    Andy

  • Sorry .. my mistake… I confused the numbers … track 8 always will be routed to channel 8 .. but in this example I’d like to get the signal into channel 10, where the recorded signal came from.

    Andy

  • Load More