Windows Audio channels 1.9 firmware

Forums Forums Qu Forums Qu general discussions Windows Audio channels 1.9 firmware

This topic contains 3 replies, has 3 voices, and was last updated by Profile photo of airickess airickess 5 years, 2 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #55963
    Profile photo of Merlin
    Merlin
    Participant

    I am demoing a unit in hopes that it will do everything we need. I noticed I can add L-R audio from windows to the Qu-32 as audio streaming and I can send it to whatever channels I like. We use a program called Show Cue, similar to Q-Lab, and I can get 2 channel audio out from it for running our shows, but I can’t figure out, if it’s even an option, to have surround, ie Back-L, Back-R coming out of the windows driver as well.

    Is the Windows USB streaming driver 2 channel only?
    Are there ways to get surround coming from a PC, is it Mac only if at all?

    Thanks,

    #55964
    Profile photo of airickess
    airickess
    Participant

    Via the USB-B port you should be able to stream as many channels as you need.

    #55966
    Profile photo of NZdave
    NZdave
    Participant

    Supposedly 32 X 32 channels

    #56008
    Profile photo of airickess
    airickess
    Participant

    In SCS, see if changing the audio driver (e.g. from ASIO to Direct Sound) will make any difference. You can find that in the Editor window under Production Properties>Audio Devices.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.