Using the QU-16 as a daw controller in Logic

Forums Forums Qu Forums Qu troubleshooting Using the QU-16 as a daw controller in Logic

This topic contains 4 replies, has 3 voices, and was last updated by Profile photo of djreggieward djreggieward 2 weeks ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #86132
    Profile photo of djreggieward
    djreggieward
    Participant

    So I’ve followed these instructions to the letter https://www.youtube.com/watch?v=yC7kyENOM-o and I have my softkey1 to daw control – bank up and softkey2 to daw control bank down, and everything works fine for the first 16 channels, but when I hit softkey2 it does not go to channel 17 or the next batch of 16 channels it goes to channel 5. I do have 24 channels in my logic session I also have Pro tools and it works as it should in Pro Tools

    #86144
    Profile photo of Steffen R
    Steffen R
    Participant

    maybe it has something to do with Logic?

    #86157
    Profile photo of Alex A&H
    Alex A&H
    Keymaster

    Hi!

    Please start a ticket at support.allen-heath.com for assistance with this.

    Thanks!
    Alex

    #86215
    Profile photo of djreggieward
    djreggieward
    Participant

    thanks I have.

    #86269
    Profile photo of djreggieward
    djreggieward
    Participant

    I have resolved the issue. I’m also using the PreSonus Faderport for transport control and that was causing the issue. I can now bank down and up 16 channels at a time. This kind of sucks cause I like the faderport for transport control.

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.