Using a stereo matrix as another stereo aux

Forums › Forums › Qu Forums › Qu general discussions › Using a stereo matrix as another stereo aux

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 2020/05/19 at 8:56 pm #91971
    Profile photo of harrisonhal266harrisonhal266
    Participant

    Hello all

    I was wondering if the QU-32’s stereo matrices could be setup just as additional stereo aux sends i.e. individual channels could feed the matrices directly similar to Yamaha CL/QL/LS/M7 consoles to allow for more aux sends?

    Thanks
    Hal

    2020/05/20 at 1:04 am #91976
    Profile photo of garyhgaryh
    Participant

    Matrixes can only be fed mixes, not input channels.

    2020/05/20 at 2:27 am #91977
    Profile photo of volounteervolounteer
    Participant

    @harrisonhal266

    Look at the block diagram around page 90.

    It shows groups and mixes LR plus talkback and siggen can go to the matrix input bus.

    2020/05/20 at 11:37 am #91986
    Profile photo of Mike CMike C
    Participant

    If you need more mixes/auxes keep in mind that the groups can be switched to mix mode in the group set up menu giving you four more stereo mixes/auxes.

    Unless of course your already using the groups for other uses.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.