We are using SQ-7.
There are three different ways to Change the Equalizer:
1. Use the dedicated Buttons and Rotaries on the right side of the Display.
2. Touch on of the Values on the Display and use the dedicated Display Rotary.
3. Use the graphic visualisation on the Display and Change it direct with touch.
All of our persons who are using this mixer had the same Thing to say About this: Why aren’t These Option synced.
When use touching the graphic visualisation and than want to fine adjust it would be very fine if the just Changed Point is selected on the Right side, so that you can go on with the rotaries and not have to select the Right Point you want to Change again.
Or if you touch one of the values on the Display, why isn’t that Point thant selected on the Right side?
I hope that you understand what we have in mind. Please feel free to aks again, if this is not understandable.
We would suggest to sync these three options.