Subgroup Send on Fader

Forums Forums SQ Forums SQ feature suggestions Subgroup Send on Fader

This topic contains 2 replies, has 3 voices, and was last updated by Profile photo of SteffenR SteffenR 4 years, 5 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
  • #88346
    Profile photo of Shakes

    As with Aux mixes, would it be possible when selecting a subgroup with the Mix Keys to control channel levels into that group using faders?
    This would appear to be a basic and effective function and was invaluable on my first digital board, a Soundcraft Si Expression.

    Profile photo of Søren Steinmetz
    Søren Steinmetz

    No, then you would use the Sub group as an AUX mix.
    If it is because you need more AUX’es, just change the numbers in the setup.

    In a Sub you change the channel levels by changeing the faders of the mix, just like on a Sub in the Analog consoles.

    Profile photo of SteffenR

    the name subgroup says that it only can route the signal (routing on or off)

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.