SQ5/SQ6 Custom built FOH Case

Forums Forums SQ Forums SQ general discussions SQ5/SQ6 Custom built FOH Case

This topic contains 6 replies, has 5 voices, and was last updated by Profile photo of Edwald Edwald 2 years, 9 months ago.

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #71680
    Profile photo of Danny-Lan
    Danny-Lan
    Participant

    SQ5/SQ6 Custom built FOH Case

    Attachments:
    You must be logged in to view attached files.
    #71685
    Profile photo of Danny-Lan
    Danny-Lan
    Participant

    SQ5/SQ6 Custom built FOH Case

    Attachments:
    You must be logged in to view attached files.
    #71718
    Profile photo of Jedifyll
    Jedifyll
    Participant

    Nice work! How is the cooling/airflow working? Is it just the handle openings?

    #72345
    Profile photo of Swell
    Swell
    Participant

    Here is my Custom SQ5 Workstation. 1of4.

    Attachments:
    You must be logged in to view attached files.
    #72383
    Profile photo of Swell
    Swell
    Participant

    2 of 4.

    Attachments:
    You must be logged in to view attached files.
    #72579
    Profile photo of JTRJAMMER
    JTRJAMMER
    Participant

    Have one of these from EWI with the M32R MOD

    C16U-P-22 | 16 SPACE HEAVY DUTY EXTRA DEEP RACK CASE WITH SLANT TOP MIXER RAILS

    Is a little bit tight as the top of the mixer presses firmly into the foam, but it
    fits. It Would be nice if the rack rail support arms were maybe 1/4″-1/2″ lower, but
    it works as is.

    Attachments:
    You must be logged in to view attached files.
    #72821
    Profile photo of Edwald
    Edwald
    Participant

    This is my design (indoor rack) for a SQ5 or SQ6. The required airflow has free play and is not negatively affected.

Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.