Topic: sends pre/post per channel | Allen & Heath Digital Community

sends pre/post per channel

Tagged: Pre Post Aux

This topic contains 9 replies, has 10 voices, and was last updated by Stix 1 month, 3 weeks ago.

Viewing 10 posts - 1 through 10 (of 10 total)

Author

Posts
2023/09/05 at 2:17 pm #114576

nottooloud
Participant

There’s no way to run backing tracks in monitors and have them fade with the house, is there?

2023/09/20 at 3:56 pm #115006

Tatsuya Nakamura
Participant

+1

Output from Input to Aux requires Pre/Post switching for each channel.

I want to send Pre to band members while Playback (DAW) should be Post Fader.

2023/11/05 at 9:45 pm #116310

Idan
Participant

+1 !!!

2023/11/09 at 11:05 am #116411

ZvirZvuk
Participant

+1

2023/11/14 at 4:28 am #116536

DannyAko
Participant

Yes please!! This is an absolute must!!

2023/11/25 at 7:54 am #116942

rkalman
Participant

+1

2023/12/04 at 9:29 am #117190

ATW
Participant

+1 , I need it for halfplaybacks with different backround music level too…

2023/12/11 at 8:22 pm #117381

boerns
Participant

+1, for the fx!

2024/01/25 at 7:04 am #118762

JoJo
Participant

This is exactly what I need, Selectable Pre/Post for all sends for independent channels, not just globally set on outputs. This one is important as it is a major workflow headache.

2024/03/08 at 9:05 am #120115

Stix
Participant

Plus 1. Agreed. The only way you can do it currently is to use a spare post fade Aux – output your backing track from that, then physically cable return that aux output back into a spare input channel then send that channel to the pre fade aux’s going to monitors. BE CAREFUL! Don’t send it back to itself!!! Not great but it is a workaround.
Please A & H give us Pre Post per channel to Aux’s
Author

Posts