Sending ST3 to Matrix Outs

Forums Forums Qu Forums Qu general discussions Sending ST3 to Matrix Outs

This topic contains 5 replies, has 2 voices, and was last updated by Profile photo of gravyface gravyface 5 months ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #111592
    Profile photo of gravyface
    gravyface
    Participant

    I have Bluetooth coming in on ST3. Works fine, routes to the Main L/R. I’d like to send to different set of powered PA speakers which are connected to the Matrix Outs (left/right). I couldn’t seem to do this: the Matrix View didn’t have ST3 as an option for a source, and the Mix/Group Sends tab on the ST3 channel doesn’t have Matrix as an option.

    #111603
    Profile photo of Mike C
    Mike C
    Participant

    You can not directly send a channel to a matrix….at least in the QU series.
    You would need to assign it to mix or group first and then bring it up in the matrix.
    ST3 can be assigned to a group or a mix just like any other input channel.

    #111604
    Profile photo of gravyface
    gravyface
    Participant

    Ah, right. Thanks.

    #116456
    Profile photo of gravyface
    gravyface
    Participant

    Reviving this: all of my stereo mix and group outs are spoken for right now.

    Mix 1 and 2 is an option, but despite panning hard left and right in the Matrix function tab, I’m only getting the right channel.

    #116458
    Profile photo of Mike C
    Mike C
    Participant

    On the mix sends how do you have levels set between mix 1 and 2?

    #116462
    Profile photo of gravyface
    gravyface
    Participant

    Both are set to 0dB

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.