SQ7 Foh and Mon with GX4816

Forums Forums SQ Forums SQ general discussions SQ7 Foh and Mon with GX4816

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Brian Brian 1 month ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #122154
    Profile photo of LucaSq

    Hi, i have two sq7 mixers and a gx4816 stage box connected via Slink card for a foh and monitor setup.
    Is it possible to manage the gains from the foh mixer?
    Come posso disattivare il mute follow? quando muto un canale dal monitor mixer si muta anche sul foh mixer.
    thanks to everyone who can help me.

    Profile photo of Brian

    Whichever console has the GX box directly connected to it will have control over the preamp gain. If it’s connected to the monitor console, only the monitor console will have control of the preamp gain. Changing the preamp gain will affect the gain for every connected device as well, so changing the preamp gain on the monitor desk will also affect the overall gain level on the FOH console.

    However both consoles will have “digital trim” available on every input where the user can increase/decrease the overall gain of the input on that console without affecting the other console. So even if the monitor desk has the preamp gain control, the FOH desk will be able to use the digital trim control to increase/decrease the overall gain of that input without affecting the monitor desk.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.